[CRUSH-build] Acrylic

[Bill Bennett]

Hi Mike
OK - the acrylic is ordered from usplastics. I got 4 at 48x48x1/8". It will probably take a week to get.
I'm going for more steel tomorrow (Wednesday). I'll also get the gas refilled. 

The diamond plate is aluminum, not steel. I'll order it from TA Caid, but not quite yet. I think we need to prioritize robot tasks over field tasks for now. 

The delivery arrived late today, I'll bring it in tomorrow. There are missing items, I'm following up. The most crucial missing is the wheel sprockets (all of them). We did get the motors, so can finish the transmissions tomorrow.

Bill
  ----- Original Message ----- 
  From: Lint104 at aol.com 
  To: build at crush1011.org 
  Sent: Tuesday, January 24, 2006 6:46 PM
  Subject: [CRUSH-build] Acrylic


  Bill,

  Bill,

  We are going to need:

  (2) Pieces 1/8"x2'x4' Clear Acrylic for the electronics board and front protector.
  (3) Pieces 1/8"x4'x4' Clear Acrylic for Ziggy's Shield.
  We are out of 1/2" sq. Steel
  Gas for Welding

  Tomorrow, I will be picking up lumber to build 1/2 of the center ramp.
  We will need to order the diamond steel plate for the ramps.

  Did the motors for the other Transmission come w/ today's delivery?

  Sub-teams,
       I will be going to Home Depot in the morning. Do you have any needs from Home Depot or Lowes.
                                                                                      Mike L.




------------------------------------------------------------------------------


  _______________________________________________
  CRUSH-build mailing list
  CRUSH-build at crush1011.org
  http://crush1011.org/mailman/listinfo/crush-build
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://wizardofaz.whsites.net/pipermail/crush-build/attachments/20060124/e8637fa4/attachment.htm