[CRUSH-build] spacers for wheel sprockets

[Bill Bennett]

never mind.... the missing sprockets just arrived and spacers, screws, and 
nuts are included.

----- Original Message ----- 
From: "Bill Bennett" <bill at wizardofaz.net>
To: "build crush" <build at crush1011.org>
Sent: Thursday, January 26, 2006 7:16 AM
Subject: [CRUSH-build] spacers for wheel sprockets


> Chassis/Drive train team:
>
> The wheel sprockets get bolted to the wheels spaced out whatever distance 
> is required to make the chains straight. I neglected to order any spacer 
> assortments for this purpose, so we'll have to find them locally. The 
> parts IFI sells are nylon with 1/2" OD and 0.194 through hole and come in 
> lengths of 1/8", 1/4", 3/8" and 1/2". Also I don't believe any screws for 
> mounting the sprockets are provided in the wheel kit, so we need to spec 
> them and buy locally. Six screws and nuts are needed per wheel, and 
> probably the right size is 10/32 - it's what we've used in the past for 
> the same sprocket hole pattern.
>
> Also please be sure to use lock-tite when doing final wheel assembly. Get 
> guidance from your mentors about this. There are many screws in these 
> wheels and we don't want wheel them vibrating loose.
>
> Bill
>
> _______________________________________________
> CRUSH-build mailing list
> CRUSH-build at crush1011.org
> http://crush1011.org/mailman/listinfo/crush-build
>