[CRUSH-build] need gear puller

[STEVEN KRASE]

  ----- Original Message -----Bill

  I have a pulley puller I'll bring in today. it's kind of bulky but might work. See you this afternoon.

  Steve 
  From: Bill Bennett<mailto:bill at wizardofaz.net> 
  To: build crush<mailto:build at crush1011.org> 
  Sent: Sunday, March 26, 2006 8:17 AM
  Subject: [CRUSH-build] need gear puller


  Hi Builders

  The collector motor still has the factory installed belt sprocket on it. I realized this morning that getting that sprocket off motor may be a challenge in Las Vegas. As I recall (I didn't do it) it was something of a challenge in our shop. We should take a gear puller with us to make it easy, but the shop doesn't have one. Does anyone have one we can take? The shaft is about 5/16" and the back side of the sprocket is approx 3/4" diameter. I don't know how much clearance there is between the motor and the gear backside, not much, maybe 1/2"? 

  If nobody has one, we should buy one. I'd appreciate a volunteer to work this out. 

  Thanks
  Bill
  _______________________________________________
  CRUSH-build mailing list
  CRUSH-build at crush1011.org
  http://crush1011.org/mailman/listinfo/crush-build
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://wizardofaz.whsites.net/pipermail/crush-build/attachments/20060326/0aa8784a/attachment.htm